Shop by Category
- On Sale!
- What's New
- Top Rated
- Best Sellers
- Accessories
- Electronic / Electrical
- GPIB
- Laboratory / Science
- Loggers
- Power
- cPCI / PXI
- Rugged tablet / Handheld
- Soldering/Rework Stations
- Software and Hardware Projects
- PC Systems for Instruments, DAQ, Logging
- PLC and PAC systems for Control
- Calibration and Measurement Systems
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- AEMC
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Best Scope
- Bravo Communications
- Diamond Systems
- Bright Alliance
- Dino-Lite
- Dwyer
- Extech
- Four-Faith
- Frequency Devices Inc.
- GW Instek
- Handywave
- Hioki
- ICS Electronics
- ITECH
- LabJack
- Juniper
- Lascar
- MCC
- Motrona
- MSR
- National Instruments
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Rugged Tech
- Senonics
- Siglent
- Testo
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
Diamond Systems 16 Channel 16 bit DAC Module
$0.00
The Ruby-MM-1616 PC/104 module provides up to 16 channels of 16-bit resolution analog voltage or current output. The output range can be individually selected for 0-5V, 0-10V, ±5V, ±10V, 0-20mA, 4-20mA, or 0-24mA. All outputs are updated simultaneously, either with a software command or in response to an external signal. A waveform generator is available on up to 16 channels with simultaneous updating of all channels.
The board also includes 48 lines of digital I/O, 40 lines of byte-wide and 8 lines of bit-wide, two 32-bit counter/timers, and four 24-bit pulse width modulators. Other features include +5V only operation, individual DC/DC converters with filtered outputs for each DAC to supply ±15V for operation, and a six layer circuit board to bury and shield the analog signals.
Features
• 4, 8, or 16 analog outputs |
• 16-bit D/A resolution |
• Unipolar and bipolar operation |
• Simultaneous updating of all outputs |
• ±10V, ±5V, 0-10V, 0-5V voltage output ranges |
• 0-20mA, 4-20mA, 0-24mA current output ranges |
• Independent output range for each channel |
• D/A digital calibration |
• Waveform generator up to 16 channels |
• 48 digital I/O lines, bit and byte-wide |
• External trigger capability |
• 2 32-bit programmable counter/timers |
• 4 24-bit pulse width modulators |
• Requires only +5V power supply |
• Fully calibrated for highest accuracy |
• PC/104 form factor (3.55" x 3.775") |
• Operating temperature -40°C to +85°C |
Rugged Design for the Real World
Extended temperature capability of -40°C to +85°C enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumpers for increased ruggedness in high-vibration environments. As with all of Diamond's analog I/O boards, Ruby-MM-1616 utilizes a 6-layer PCB with split analog and digital power and ground planes to keep the analog outputs quiet. All analog and digital lines reset to a known state on power up or system reset to guarantee predictable behavior. Factory calibration ensures the highest possible accuracy over the lifetime of the product. The board requires only +5V from the system power supply. These features make Ruby-MM-1616's quality and performance a leader in the market.