Shop by Category
- On Sale!
- What's New
- Top Rated
- Best Sellers
- Accessories
- Electronic / Electrical
- GPIB
- Laboratory / Science
- Loggers
- Power
- cPCI / PXI
- Rugged tablet / Handheld
- Soldering/Rework Stations
- Software and Hardware Projects
- PC Systems for Instruments, DAQ, Logging
- PLC and PAC systems for Control
- Calibration and Measurement Systems
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- AEMC
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Best Scope
- Bravo Communications
- Diamond Systems
- Bright Alliance
- Dino-Lite
- Dwyer
- Extech
- Four-Faith
- Frequency Devices Inc.
- GW Instek
- Handywave
- Hioki
- ICS Electronics
- ITECH
- LabJack
- Juniper
- Lascar
- MCC
- Motrona
- MSR
- National Instruments
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Rugged Tech
- Senonics
- Siglent
- Testo
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
Hioki CLAMP ON AC/DC HiTESTER 3285
$0.00
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4375 is a 1000A AC/DC True RMS clamp meter that features a uniquely designed slim jaw that lets you easily get into the narrow gaps between cables in crowded electrical distribution boxes without fear of damaging the cables or the clamp meter. The broad -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in challenging situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.
Key Features
- Easily get into tight spaces between cables thanks to thin sensor structure
- Measure up to 1000 A
- Automatic AC/DC function helps boost work efficiency
- Measure DC voltages of up to 1700 V (*1)
- Simultaneously measure inrush current in RMS and crest values
- Expanded -25 °C to 65 °C operating temperature range
- 3 year guarantee
*1 Your instrument can be used to measure voltages in excess of 1000 V DC if and only if both of the following conditions are satisfied: 1. The circuit under measurement is isolated from the commercial power grid. 2. The circuit under measurement is isolated from ground.
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
3285 | 3285-20 (Discontinued) | |
DC current | 200.0/ 2000 A, Basic accuracy: ±1.3 % rdg. ±3 dgt. | |
AC current | 200.0/ 2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.3 % rdg. ±3 dgt. |
|
DC voltage | 30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | |
AC voltage | 30.00 V to 600 V, 3 ranges (10 to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.0 % rdg. ±3 dgt. |
|
Crest factor | 2.5 or less (1.42 at 2000 A, 1.7 at 600 V) | |
Monitor, Analog output | DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 15 kHz bandwidth (±3dB) | N/A |
Resistance, Continuity check | N/A | 1000 Ω/ 10.00 kΩ, Basic accuracy: ±1.5 % rdg. ±5 dgt., Continuity: Beep sound at 30 Ω or less |
Frequency | 1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt. | |
Other functions | AC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero | |
Display | Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph) | |
Power supply | 6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02/-03 | 6F22 (Stacked manganese battery) ×1, Continuous use: 20 hours, Cannot use with the AC adapter |
Core jaw dia. | φ 55 mm (2.17 in) | |
Dimensions and mass | 62 mm (2.44 in) W × 260 mm (10.24 in) H × 39 mm (1.54 in) D, 540 g (19.0 oz) |
|
Accessories | Test Lead L9207-10 ×1, Carrying Case 9345 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1 |