Shop by Category
- On Sale!
- What's New
- Top Rated
- Best Sellers
- Accessories
- Electronic / Electrical
- GPIB
- Laboratory / Science
- Loggers
- Power
- cPCI / PXI
- Rugged tablet / Handheld
- Soldering/Rework Stations
- Software and Hardware Projects
- PC Systems for Instruments, DAQ, Logging
- PLC and PAC systems for Control
- Calibration and Measurement Systems
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- AEMC
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Best Scope
- Bravo Communications
- Diamond Systems
- Bright Alliance
- Dino-Lite
- Dwyer
- Extech
- Four-Faith
- Frequency Devices Inc.
- GW Instek
- Handywave
- Hioki
- ICS Electronics
- ITECH
- LabJack
- Juniper
- Lascar
- MCC
- Motrona
- MSR
- National Instruments
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Rugged Tech
- Senonics
- Siglent
- Testo
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
Dwyer Model CSG Current/Voltage Signal Generator
$0.00
Ramp Function, Large Numeric LCD Display
The pocket size CSG Current and Voltage Signal Generator is an ideal tool for troubleshooting transmitters, transducers, motors, and actuators. The unit generates a 0 to 10 VDC signal in increments of 1 volt or a 0 to 20 mA signal in increments of 1 mA. The Model CSG features a large LCD display with a blue backlight for use in dimly lit areas. The Model CSG continuously ramps the output using user selected minimum, maximum, and ramp interval timing parameters. Units are furnished with a battery, 120 VAC plug-in power supply, test leads with alligator clips, carrying case, and instruction manual.
Features
- Large Backlit Display
- Timed Ramp Function
- Auto Power Off
- Process Display Configuration
- Transmitter Calibration
Specifications
-
Impedance: Voltage: 1000Ω min.; Current: 300Ω max. Output: 0 to 20 mA (1 mA increments); 0 to 10 VDC (1 VDC increments). Resolution: 1 mA (current); 1 VDC (voltage). Ramping Time Intervals: 1 to 20 sec (1 sec increments). Ambient Operating Temperature: 32 to 122°F (0 to 50°C). Power Requirements: 9 V alkaline battery, included, user replaceable or 120 VAC (provided). Auto Power Off: 1 to 20 min. Electrical Connections: 6 ft (1.8 m) with alligator clips. Weight: 6 oz (170 g).