ORing Industrial 2-Port Gigabit High Power PoE Injector - INJ-102GT-24V


Product Tags:
ORing Industrial 2-Port Gigabit High Power PoE Injector - INJ-102GT-24V

The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE outputs.  The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable.  This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable.  Because of this intelligent detection, only an IEEE 802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector.  Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards.  Because of its 12~57V insertion, the installer doesn't need to worry about voltage drops caused by cable length.  The INJ-102GT-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/af PoE standards.  

Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for the power supply to be able to sense the PoE devices signature and apply power.  Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).



  • PoE+Injector for 1x10/100/1000 Base-T(X)
  • Fully compliant with IEEE802.3at/802.3af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports Power Output up to 30Watts per port
  • Supports Wide Power Input range from 12Vdc to 57VDC
  • IP-30 Rugged Case Design
  • DIN-Rail and Wall Mount Design



ORing Injector Model INJ-102GT-24V
Physical Ports  
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2

10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output

Operating Voltage  
Input Voltage 12 ~ 57 Vdc on 4-pin terminal block
Output Power 50V / 600mA, 30 Watts max. Per port
LED Indicator  
Power Indicator PWR / Ready: 1 x LED 
Green On: Power is on and functioning Normally.
PoE Indicators 2 x LED 
Blue On: PoE Device Link 
Blue Blinking: Detecting PoE Device 
Blue Off : None PoE Device Detected
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.)
Weight (g) 370 g
Storage Temperature -40 to 80°C (-40 to 176°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 5% to 90% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A,

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years
Sold Out
Product Images (click to enlarge)
  • ORing Industrial 2-Port Gigabit High Power PoE Injector - INJ-102GT-24V