Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
ORing Industrial 6-Port Unmanaged Gigabit PoE Ethernet Switch IGPS-1042GP
$0.00
IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 12~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Features:
- IGPS-1042GP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
- Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
- Advanced PoE power boost technology to support dual 24VDC power inputs
- SFP port supports 100Base-FX and 1000Base-X speed
- Supports auto-negotiation and auto-MDI/MDI-X
- Supports store and forward transmission
- Supports flow control
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
- Supports Jumbo Frame up to 10K Bytes
Specifications:
ORing Switch Model |
IGPS-1042GP-24V |
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX |
4 |
100/1000Base-X SFP port |
2 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 1K MAC addressessses |
Processing | Store-and-Forward |
LED Indicators | |
Power indicator |
Green : Power LED x 2 |
Fault Indicator |
Amber : Indicates PWR1 or PWR2 failure occurred |
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4) |
Green for port Link/Act. |
100/1000Base-X SFP port indicator (P5 ~ P6) |
Green for port Link/Act. |
|
|
SFP Speed DIP-Switch |
|
DIP-Switch 1/2 |
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps |
|
|
Relay Output DIP-Switch |
|
DIP-Switch 1 |
Power-1 failed warning : (ON) enable, (OFF) disable |
DIP-Switch 2 |
Power-2 failed warning : (ON) enable, (OFF) disable |
Fault contact | |
Relay |
Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power |
Dual DC inputs. 12~57VDC on 6-pin terminal block. |
Power consumption (Typ.) |
7 Watts |
PoE Power budget |
60Watts at 12~24VDC, 120Watts at 24~57VDC |
Overload current protection |
Present |
Reverse polarity protection |
Present |
|
|
Physical Characteristics |
|
Enclosure | IP-30 |
Dimensions (W x D x H) |
41 (W) x 94.9 (D) x 144.3(H) mm (1.61 x 3.74 x 5.68 inches) |
Weight (g) |
650 g |
Environmental | |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Temperature |
-40 to 75°C (-40 to 167°F) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals | |
EMI |
FCC Part 15, CISPR (EN55032) class A, EN55024 |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-32 |
Vibration |
IEC60068-2-6 |
Safety |
EN60950-1 |
Warranty | 5 years |