Rigol DS1074Z-S 70 MHz + 25 MHz Digital Oscilloscope with 2ch Signal Source

$0.00

Product Tags:
Rigol DS1074Z-S 70 MHz + 25 MHz Digital Oscilloscope with 2ch Signal Source

70 MHz Digital Oscilloscope with 4 channels and 25 MHz 2 channel integrated source plus 12 Mpt memory and connectivity and 1 GSa/sec sampling.

DS1000Z series are 4-channel digital oscilloscope bandwidth 70MHz ~ 100MHz, sample rates up to 1GSa / s, while bothdeep storage depth and high waveform capture rate, high-performance economical general purpose digital oscilloscopes. DS1000Z series uses many of today's advanced technology and processes, the overall performance reached the international advanced level, for the most widely used digital oscilloscope markets including communications, semiconductor, computer, aerospace and defense, instrumentation, industrial electronics, consumer electronics, automotive electronics, site maintenance, research / education and many other areas of universal design / debugging / testing requirements and design an oscilloscope.

 

Specifications:

Model DS1074Z DS1074Z-S DS1104Z DS1104Z-S
Analog Bandwidth 70 MHz 100MHz
Channels 4
Max. Sample rate 1GSa/s (Single-channel),  500MSa/s(Dual-channel), 250MSa/s(Fulll-channel)
Max. Memory Depth 12Mpts(std.), 24Mpts(option)
Max. Waveform Capture rate Up to 30,000 wfms/s
Real Time waveform Record,
Replay and Analysis function
Up to 60, 000 Frames(Opt.)
Std. Probes RP2200 150MHz BW Passive Probe:4 sets
Built in 2 Ch Source No Yes No Yes

 

Sample
Sample Mode Real-time Sample
Real-time Sample Rate 1 GSa/s (single-channel)
500 MSa/s (dual-channel)
250 MSa/s (four-channel)
Peak Detect 4 ns
Averaging After both the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024.
High Resolution The highest resolution is 12 bit
Memory Depth Single-channel: Auto, 12k pts, 120k pts, 1.2M pts, 12M pts and 24M pts (option) are available
Dual-channel: Auto, 6k pts, 60k pts, 600k pts, 6M pts and 12M pts (option) are available
Four-channel: Auto, 3k pts, 30k pts, 300k pts, 3M pts and 6M pts (option) are available
Input
Number of Channels four-channel
Input Coupling DC, AC or GND
Input Impedance (1 MΩ±2%) || (13 pF±3 pF)
Probe
Attenuation
Coefficient
0.01X-1000X, 1-2-5 step
Maximum Input Voltage (1MΩ)  Maximum input voltage of the analog channel
CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
With RP2200 10:1 probe: CAT II 300 Vrms
Horizontal
Time Base Scale 5 ns/div to 50 s/div
Time Base Accuracy [1] ≤ ± 25 ppm
Time Base Drift ≤ ± 5 ppm/Year
Delay Range Pre-trigger (negative delay): ≥1 screen width
Post-trigger (positive delay): 1 s to 100,000 s
Time Base Mode Y-T, X-Y, Roll, Delayed
Number of X-Ys 1 path
Waveform Capture Rate [2] 30,000 wfms/s (dots display)
Vertical
Bandwidth (-3dB) DS1104Z: DC to 100 MHz
DS1074Z: DC to 70 MHz
Single Bandwidth DS1104Z: DC to 100 MHz
DS1074Z: DC to 70 MHz
Vertical Resolution 8 bit
Vertical Scale 1 mV/div to 10 V/div
Offset Range 1 mV/div to 499 mV/div: ± 2 V
500 mV/div to 10 V/div: ± 100 V
Bandwidth Limit1 20 MHz
Low Frequency Response
(AC coupling, -3dB)
≤5 Hz (on BNC)
Rise Time [1] DS1104Z: 3.5 ns
DS1074Z: 5 ns
DC Gain Accuracy [3] <10 mV: ±4% full scale
≥10 mV: ±3% full scale
DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset
Channel to Channel
Isolation
DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range ±5 div from the center of the screen
Trigger Mode Auto, Normal, Single
Holdoff Range 16 ns to 10 s
High Frequency
Rejection2
75 kHz
Low Frequency
Rejection2
75 kHz
Trigger Sensitivity [1] 1.0div (below 5mV or noise rejection is enabled)
0.3div (above 5mV and noise rejection is disabled)
Edge Trigger
Edge Type Rising, Falling, Rising&Falling
Pulse Trigger
Pulse Condition Positive Pulse Width (greater than, lower than, within specified interval)
Negative Pulse Width (greater than, lower than, within specified interval)
Pulse Width Range 8 ns to 10 s
Runt Trigger
Pulse Condition None, > (greater than), < (lower than), <> (within the specified interval)
Polarity Positive, Negative
Pulse Width Range 8 ns to 4 s
Windows Trigger 
Windows Type Rising, Falling, Rising&Falling
Trigger Position Enter, Exit, Time
Windows Time 8 ns to 10 s
Nth Edge Trigger
Edge Type Rising, Falling
Idle Time 16 ns to 10 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition Positive Slope (greater than, lower than, within specified interval)
Negative Slope (greater than, lower than, within specified interval)
Time Setting 8 ns to 10 s
Video Trigger
Signal Standard Support standard NTSC, PAL and SECAM broadcasting standards
Support 480P, 576P HDTV standards
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
Delay Trigger
Edge Type Rising, Falling
Delay Type > (greater than), < (lower than), <> (within the specified interval), >< (outside the specified interval)
Delay Time 8 ns to 10 s
TimeOut Trigger 
Edge Type Rising, Falling, Rising&Falling
TimeOut Value 16 ns to 10 s
Duration Trigger 
Pattern Setting H, L, X
Trigger Condition > (greater than), < (lower than), <> (within the specified interval)
Duration Time 8 ns to 10 s
Setup/Hold Trigger 
Edge Type Rising, Falling
Data Pattern H, L,X
Setup Time 8 ns to 1 s
Hold Time 8 ns to 1 s
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User
Data Bits 5 bits, 6 bits, 7 bits, 8 bits
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing Ack, Address, Data, A&D
Address Bits 7 bits, 8 bits, 10 bits
Address Range 0x0 to 0x7F, 0x0 to 0xFF, 0x0 to 0x3FF
Byte Length 1 to 5
SPI Trigger
Trigger Condition TimeOut, CS
Timeout Value 16 ns to 10 s
Data Bits 4 bit to 32 bit
Data Line Setting H, L, X
Measure Manual mode | Voltage deviation between cursors (ΔV)
Time deviation between cursors (ΔT)
Reciprocal of ΔT (Hz) (1/ΔT)
Track mode | Voltage and time values of the waveform point
Auto mode | Allow to display cursors during auto measurement
Auto Measurement Measurements of Maximum, Minimum,
Peak-Peak Value, Top Value, Bottom Value,
Amplitude, Average, Mean Square Root,
Overshoot, Pre-shoot, Frequency, Period, Rise
Time, Fall Time, Positive Pulse Width, Negative
Pulse Width, Positive Duty Cycle, Negative
Duty Cycle, Delay A~B , Delay A~B , Phase
A~B , Phase A~B
Number of
Measurements
Display 5 measurements at the same time
Measurement
Range
Screen Region or Cursor Region
Measurement
Statistic
Counter
Average, Max, Min, Standard Deviation
Number of Measurements
Hardware 6 bits counter (channels are
selectable)
Math
Waveform A+B, A-B, A×B, A/B, FFT, &&, ||, ^, !, intg, diff, sqrt, lg, ln, exp, abs
FFT Window Rectangle, Hanning, Blackman, Hamming,Flat Top,Triangle
FFT Display Split, Full Screen
FFT Vertical Scale dB/dBm, Vrms
Number of Buses
for Decoding
2
Decoding Type Parallel (standard), RS232/UART (option), I2C (option), SPI (option)
Display
Display Type 7.0 inches TFT LCD display
Display Resolution 800 horizontal×RGB×480 vertical pixel
Display Color 160,000 Color (TBD)
Persistence Time Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite
Display Type Dots, Vectors
I/O
Standard Ports USB HOST, USB DEVICE, LAN, Aux (TrigOut /PassFail)
Signal Sourse (DS1000Z-S) 
Number of Channels  2
Sample Rate  200 MSa/s
Vertical Resolution  14 bits
Highest  Frequency  25 MHz
Standard Waveform  Sine, Square, Pulse, Triangle, Noise, DC
Arbitrary Waveform  Since, Exp.Rise, EXP.Fall, ECG, Gauss, Lorentz, Haversine
Sine  Frequency Range  0.1 Hz to 25 MHz
 Flatness  ±0.5 dB (relative to 1 kHz)
 Harmonic Distortion  -40 dBc
 Stray (Non-Harmonic)  -40 dBc
 Total Harmonic Distortion  1%
 Signal-to-Noise ration  40 dB
Square/Pulse  Frequency Range  0.1 Hz to 15 MHz
 Rise/Fall time  <15 ns
 Overshoot  <5%
 Duty Cycle  10% to 90%
 Duty Cycle  Resolution  1% to 10 ns (select the greater one)
 Minimum Pulse Width  20 ns
 Pulse Width Resolution  10 ns or 5 bits (select the greater one)
 Jitter  500 ps
Triangle  Frequency Range  0.1 Hz to 100 kHz
 Linearity  1%
 Symmetry  0 to 100%
Noise [1]  Bandwidth 25 MHz
Internal Generated
waveforms
 Frequency Range  0.1 Hz to 1 MHz
Arbitrary Waveforms  Frequency Range  0.1 Hz to 10 MHz
 Waveform Length  2 to 16k pts
Frequency  Accuracy 100 ppm (lower than 10 kHz)
50 ppm (greater than 10 kHz)
 Resolution  0.1 Hz or 4 bit, select the greater one
Amplitude  Output Range  20 mVpp to 5 Vpp, High-resistance
10 mVpp to 2.5 Vpp, 50 Ω
 Resolution  100 μV or 3 bit, select the greater one
 Accuracy  2% (1 kHz)
DC Offset  Range  ±2.5 V, High-resistance
±1.25 V, 50 Ω
 Resolution  100 μV or 3 bit, select the greater one
 Accuracy  2% (1 kHz)
General Specifications
Probe Compensation Output
Output Voltage [1] About 3 V, peak-peak
Frequency [1] 1 kHz
Power
Power Voltage 100-240 V, 45-440 Hz
Power Maximum 50 W
Fuse 2 A, T degree, 250 V
Environment
Temperature Range In operation: 0°C to +50°C
Out of operation: -40°C to +70°C
Cooling Method Fan
Humidity Range 0° to +30°C : ≤95°C relative humidity
+35°C to +40°C : ≤75°C relative humidity
+40°C to +50°C : ≤45°C relative humidity
Altitude In operation: under 3,000 meters
Out of operation: under 15,000 meters
Mechanical
Dimensions [4] Width×Height×Depth =313.1 mm× 160.8 mm×122.4 mm
Weight [4] Without package | 3.2 kg ± 0.2 kg
With package | 3.8 kg ± 0.5 kg
Adjustment Interval
  The recommended calibration interval is one year.
Regulation Standards
Electromagnetic 2004/108/EC
Compatibility Execution standard EN 61326-1:2006 EN
61326-2-1:2006
Safety UL 61010-1:2004; CAN/CSA-C22.2 NO.
61010-1-2004;
EN 61010-1:2001; IEC 61010-1:2001
Product Images (click to enlarge)
  • Rigol DS1074Z-S 70 MHz + 25 MHz Digital Oscilloscope with 2ch Signal Source