Shop by Category
Shop by Brand
- Aaeon
- Accel Instruments
- Adlink
- Antaira
- Arbor
- Array
- Asian Electron
- Atek
- Atten
- Bravo Communications
- Diamond Systems
- Digilent -MCC
- Digi International
- Dino-Lite
- Dwyer
- Extech
- GW Instek
- Handywave
- ICS Electronics
- ITECH
- LabJack
- Jewell Instruments
- Juniper
- Lascar
- Motrona
- MSR
- Numato
- Omega
- Opto22
- ORing
- PowerVar
- Rigol
- Senonics
- Siglent
- Tripp Lite
- TVBTECH
- Twintex
- Vaisala
- Winmate
CDI Air Flower Meter - 6200-15ST
$0.00
Product Tags:
Product Tags:
Air Flow Meter for 1-1/2" Sanitary Tubing
Special Calibration ID 35 mm
Display in Nm3/hour
The flow meter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16 in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flow meter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter for Compressed-Air Systems
-
Easy to install
-
Housing and display rotate to suit piping orientation
-
IP-66 rating; suitable for wet locations
-
Milliamp and pulse outputs
-
Optional RS-485 output for networking
The CDI 6200 is a true thermal-mass flowmeter, adapted for easy installation in existing piping systems. Its large, bright LED display is easy to read from a distance and its weather-proof enclosure and surge protection make it suitable for outdoor installation. A 4-20 mA output and a pulse output are standard; a wired Modbus RS485 output is available as an option.
Specifications
Accuracy | 5 percent of reading plus one percent of full scale at an air temperatures from 20 to 120 degrees Fahrenheit (-6.5 to 49 Celsius) and a pressure of 100 psig (7 bar). |
Fluids | Compressed Air, Nitrogen |
Operating Pressure | 200 psig (14 bar) maximum on Sch. 40 steel and on Type L copper below three inch; consult CDI for other materials and sizes. |
Input Power | 250 mA at 20 to 28 Vdc Output resistance 400 Ohms max. |
Exposed Materials | Stainless steel, aluminum, gold, thermal epoxy and Viton (seal) |
Display | Four-digit LED display |
Response time |
One second to 63 percent of final value |